Second generation (1994)
| Second generation | |
|---|---|
| Wheelbase | 108.3 in (2,751 mm) (reg. cab short bed) 117.9 in (2,995 mm) (reg. cab long bed) 122.9 in (3,122 mm) (ext. cab short bed) |
| Length | 190 in (4,826 mm) (short bed) 203 in (5,156 mm) (ext. cab) 205 in (5,207 mm) (long bed) |
| Width | 67.9 in (1,725 mm) |
| Height | 63.5 in (1,613 mm) |
How wide is an S10 box?
The Chevy S-10 has a bed that iS72. 8 inches long and has a width of 54.9 inches.
How wide is a 2001 S10 bed?
Cross-reference Chart for Pickup Truck Bed Size Dimensions
| YEAR | Outside Box Width | |
|---|---|---|
| S10 4-Door | 2001-2004 | 62″ |
| S10/Sonoma | 1994-2004 | 62″ |
| 1982-1993 | 60 1/4″ | |
| S10 Stepside | 1994-2004 | 61 3/4″ |
How wide is a pickup bed?
Bed Widths: Single Rear Wheel Trucks take a 7′ or 84” wide bed. Dual rear wheel trucks take an 8′ or 96” wide bed. Brand to Brand can vary a few inches. Some cab & chassis dually trucks take a slightly narrower bed, 90”-94”
What does a 1988 S10 weigh?
As for its exterior dimensions, it measured 178 inches in length, 65 inches in width and 61 inches in height with a 108-inch wheelbase. Curb weight varied at a range of about 2,500 to 3,000 lbs., depending on trim and transmission.
How long is a 1991 Chevy S10?
178.2 in
Used 1991 Chevrolet S-10 Specs & Features
| Dimensions | |
|---|---|
| Height | 63.4 in. |
| Length | 178.2 in. |
| Wheel base | 108.3 in. |
| Width | 64.8 in. |
How wide is a 1st gen s10?
Its width is 67.90 inches, and the height is 63.40 inches.
How do I know my truck bed size?
How To Measure Your Truck Bed
- Place your measuring tape at the bulkhead of your truck bed.
- Moving along your bed rail, extend the measuring tape to the inside edge of the top of your tailgate. Record the measurement in inches.
- Divide the number of inches by 12 to determine the length of your truck bed in feet.
How wide is a full size pickup?
Specifications as Tested
| General | ||
|---|---|---|
| Overall length (in.) | 212.4 | 231.9 |
| Overall width (in.) | 76.7 | 79.9 |
| Height (in.) | 72.2 | 77.2 |
| Track f/r (in.) | 65.9/65.9 | 67.6/67.6 |
What transmission is in a 1988 Chevy S10?
Transmissions and Gas Tanks Only the EL Regular Cab Short Bed 2WD and Extended Cab Short Bed 2WD got a standard five-speed manual transmission with overdrive. The other trims got the four-speed automatic transmission with overdrive.
How much does a 200 S10 weigh?
Dimensions, Weights & Capacities
| Curb Weight | 3015 pounds |
|---|---|
| Max Seating Capacity | 3 |
| Minimum Ground Clearance | 7.2 inches |
| Overall Length | 190.1 inches |
| Front Shoulder Room | 56.9 inches |
What year Chevy S10 are interchangeable?
Body parts for any S10 built prior to 1994 should interchange. engine and drivetrain parts will only interchange with S10s equipped with the same engine and transmission as yours.
What does Chevy S10 stand for?
Vehicles. Chevrolet S-10, a pickup truck. S10 (Nissan Silvia), second generation of the car. Stemme S10, a self-launching sailplane. Rans S-10 Sakota, aerobatic aircraft.
How many sq ft is a truck bed?
Calculating Square Footage Assume a truck bed measures 48 inches in width by 96 inches in length. We would calculate: 48 x 96 = 4,608. We would then calculate: 4,608 ÷ 144 = 32, so our truck bed has an area of 32 square feet.
How many cubic feet is a 6 foot truck bed?
How many cubic feet is a 6 foot truck bed? The bed of a standard short-bed pickup has dimensions of: 6′ long X 4.5′ wide X 1.5′ high. When loaded level full, a truck of this size will hold 1.5 cubic yards of material.
What is the normal width of a truck?
As you can see, the average height of a half-ton pickup truck is 76.4 inches. These trucks are slightly wider than they are tall with the average width – without tow mirrors – reaching 80.8 inches.
What is the standard width of a truck?
Overall length is 53 feet; overall width is 102″; and overall height is 13ft 6 inches. On the inside, semi-trailers are 47′ 6″ long, 98.5″ wide and 108 inches high.
Is Chevy S10 a good truck?
It has been the most reliable truck I’ve ever owned. I purchased this truck as a commuter vehicle to keep the miles off of my Chevy Diesel. So far my Chevy S10 has over 250,000 miles on it, and it’s still going strong.
How heavy is a S10 bed?
1748.0 lbs. Thereof, what does a 84 s10 weigh? Long bed would be @ 3690 lbs., with short bed coming in a few hundred pounds lighter….How long is a 1991 Chevy s10?
| Height: | 5 ft. 3.4 in. (63.4 in.) |
|---|---|
| Length: | 16 ft. 0.8 in. (192.8 in.) |
| Wheel Base: | 10 ft. 2.9 in. (122.9 in.) |
| Width: | 5 ft. 4.8 in. (64.8 in.) |
What years of Chevy truck parts are interchangeable?
If your talking motors, then 1987 to 1995 were TBI and the parts are somewhat interchangeable. Now there are some exceptions. As far as wheels the 5 lug pattern is the same from the 1970’s up to 1999.
