No, the SkyCaddie Watch does not require a membership/subscription. You can choose to get the membership, or not get the membership.

How do I renew my SkyCaddie membership?

How do I renew my membership?

  1. Turn on your SkyCaddie and connect it to your computer.
  2. Launch CaddieSync.
  3. Click the ACCOUNT tab in the upper navigation bar.
  4. Login with your username and password.
  5. On the Account Overview page, click link the Renew link under Actions at the lower right of the CaddieSync window.

Does SkyCaddie touch require a membership?

The “Basic View” on the SkyCaddie TOUCH requires no additional membership fees, and provides text distances to the near, center and far points on the green. The battery level, GPS signal strength, and time are always displayed on the TOUCH.

Is SkyCaddie legal?

The SkyCaddie was the first electronic device to be used in tournament play on the Adams Golf Tight Lies Tour by adoption of a local rule to allow its use during play. Unless a local rule is adopted, you should check with your golf professional prior to using the SkyCaddie in a USGA sanctioned event.

Is there an annual fee for SkyCaddie?

The License Fee is due either annually or every three years, based on the Membership Plan you have selected. SkyGolf also reserves the right to charge an activation fee, which, if any, will also be set forth on the Membership Plan selection page and the Membership Plan activation page.

How do I activate my SkyCaddie?

How do I activate my SkyCaddie?

  1. Launch CaddieSync.
  2. Connect the USB cable from your computer to the SkyCaddie.
  3. Press the Sync button on the lower navigation bar.
  4. Log in to your account or create an account if this is your first SkyCaddie.
  5. Follow the on-screen instructions to complete the activation process.

How do I use SkyCaddie SGX?

Press and hold the center button to turn the SkyCaddie SGX on. To start a round, use the Joystick to select “Play Golf” on the Main Menu. Select a scoring option for this round. The SGX will take a few minutes to get a signal, to determine your location and nearest course.

How do I reset my SkyCaddie SGX to factory settings?

If you have a SkyCaddie Breeze or SGX you can reset these devices by pressing and holding down the power button and pushing in on the joystick (like a doorbell button) at the same time for about 10 seconds. The caddie should power off. Then, power the caddie back on and it should be responding properly.

How do I reset SkyCaddie SGX?

How do you charge a SkyCaddie SGX?

Charging Your SGX Using Your Computer With the SGX powered off, connect the micro-USB end of the cable into the SGX, then plug in the USB end into an open port on your computer. Your SGX will power on and recharge through this connection. Please do not turn off the SGX while it is charging.

How do I sync my SkyCaddie SX500?

Go to and click on “Register New Product” on the top menu bar 3. Turn on the SX500 and click SYNC and then USB SYNC. 4. Follow the onscreen instructions to complete the registration process.

How do I use SkyCaddie?

Your SkyCaddie TOUCH will charge when it is connected to a computer that is powered on. Simply connect the USB end of the cable to your computer and the micro-USB end to the TOUCH. If your TOUCH is powered on, it will initially display the “Sync” screen and then will indicate that your TOUCH is being charged.

How do I sync SkyCaddie?

Please do the following:

  1. Go to
  2. Connect your SkyCaddie to your computer.
  3. Click SYNC in the upper right hand corner.
  4. CaddieSync Express will launch, please follow the update prompts.
  5. When the update process is finished you are ready for play.

How do I sync my SkyCaddie SX400?

REGISTERING YOUR SX400 WITH CADDIESYNC EXPRESS DESKTOP APP Go to and click on “Register New Product” on the top menu bar 3. Turn on the SX400 and click SYNC and then USB SYNC. 4. Follow the onscreen instructions to complete the registration process.

How do I sync SkyCaddie SG5?

Sync your SkyCaddie SG5

  1. Power on the SkyCaddie. Please turn on your SkyCaddie by pressing the Center Soft Key.
  2. Connect the Cable. Please make sure that the cable provided with your SkyCaddie is plugged into the corresponding port on the bottom edge of the SkyCaddie.
  3. Plug into the Computer.
  4. Sync your SkyCaddie.